A kitchen gets drawn four times before anyone cuts a board.
Once in the design software, where the client approves the look. Once as a shop drawing, where the millwork actually gets dimensioned. Once on the order sheet, where the parts get specified. Once as a render, because the client needs to see something that looks like a photograph.
Four documents. One kitchen. And nobody checks any of them against the others.
The problem is not the drawing
Designers talk about this as a rendering problem or a workflow problem. It isn't. It's a re-keying problem.
The same cabinet run is retyped into four systems by a human being, usually at the end of a long day, usually under time pressure. The first drawing is thoughtful. The fourth is transcription.
Transcription is where errors live. Not because anyone is careless, but because retyping the same number is not work the brain treats as important. It's the reason a cut list can disagree with a plan that everyone already approved, and nobody notices until the shop floor does.
I have watched a $10,000 order go wrong because a finish was approved against the wrong evidence. That one was mine. This one is more common and less dramatic: the parts are right, but the list is wrong, and the mistake surfaces at the saw.
What I'm building
One model. Everything else generated from it.
Change the model, the plan changes, the elevations change, the cut list changes, the render changes. No re-keying, because there is nothing to re-key into — the documents are outputs, not copies.
The stack is unglamorous on purpose: Python for the geometry and the cut list logic, Three.js for the 3D view, running locally. It works on my machine, which is the only claim I'm making today.
The render was never the hard part
Everyone assumes the 3D is the difficult bit. It isn't. The 3D is the part that impresses clients and takes a weekend.
The cut list is the hard part.
A cut list is not a list of parts. It's a list of parts under constraints: sheet yield, grain direction, edge banding, kerf, the order the shop prefers to cut in, and which offcuts are worth keeping. Two cabinets that look identical in a render can have completely different cut lists, because one has a grain direction that forces a different sheet layout.
Get that wrong and the model is a toy. Get it right and the shop stops double-checking your paperwork, which is the actual product.
What this is not
It is not a product. It is not for sale. There is no pricing page and no waitlist.
It is also not finished. Right now it's held together by hope and one very long function I'm embarrassed by, and I'd rather show that than pretend otherwise.
What it is: the tool I wanted when I was designing kitchens and retyping the same run for the fourth time at 7pm.
If you do this by hand
I want the edge cases I haven't hit.
Which constraint bites first in your shop — grain direction, sheet yield, or lead time on a specific door style? Where does your cut list disagree with your drawing most often? What does the shop do when the plan and the parts list argue?
If you have a workflow you'd defend, I'd like to hear it. That is not a pitch. I'm building the thing and I'd rather build it against a real constraint than a guessed one.